HYBRID : LANDSCAPE LIGHT
Model Number : SLSP-KX-01-4500
General Spec.
| P/N : | DS-300 |
|---|---|
| Rated Power : | WT 300w / PV 85w or 120w |
| Rated Wind Speed | 13.5 m/s |
| Rated Speed : | 835 rpm |
| Cut-In Wind Speed : | <3 m |
| Cut-Out Wind Speed : | 15.5 m/s |
| Survival Wind Speed : | 60 m/s |
Hybrid Powered Landscape Lights Spec.
| Model No : | SLSP-K85-01-4500 / SLSP-K120-01-4500 |
|---|---|
| Wind Turbine : | DS-300 Vertical Axis Wind Turbine, 300W @13.5 m/s wind speed |
| Solar Power : | Silicon mono crystal in rated power output of 85W, 12V Silicon mono crystal in rated power output of 120W, 24V |
| DC-out : | 12V / 24V |
| LED Lamp : | 30W LED Main lamp x1 1W Spot Light x2 |
| Power Charging Controller : | Solar :RC10-II / Wind: WG400 |
| Battery : | 2 pieces of deep-cycle gel battery of 12V/100AH, total 200Ah |
| Height : | Lamp to the ground 4.5 meters |
Dimension/Weight
| Rotor Diameter : | 1.24 m |
|---|---|
| Rotor Height : | 1.06 m |
| Mast Height(Not Included) : | 4 m |
| Total Height : | 8.16 m |
| Total Weight : | 35 KGS (Mast not included) |
Rotor Specification
| External Darrieus : | 3 Blades |
|---|---|
| Internal Savonius : | 2 Layers |
| Material of Blades : | Anodized Aluminum |
| Material of Axis : | Galvanized Steel SS400 |
Generator Specification
| Generator Type : | AC, 3 Phase, Synchronism PMG |
|---|---|
| Rated Output : | 300 w |
Braking System
| Automatic Braking : | Over speed short circuit braking system |
|---|---|
| Manual Braking : | 3-Phase short circuit by NFB brake |
Operation Environment
| Ambient Temperature : | -10~40°C |
|---|---|
| Ambient Humidity : | 95% max. |
Note:
- Information and specification are subject to change without notice!
SLSP-KX-01-4500 Wind Power Controller Spec.
| Model : | WG0400-24 |
|---|---|
| Part Number : | |
| Output Power : | 400 w |
| Input Voltage Range : | 0~50V |
| Power Charge (Start/Stop) : | 6V/4V |
| Rated Input Voltage : | 28V |
| Rated Input Current : | 15A |
| MPPT Efficiency : | >92%/>95% |
| Sleeping Mode| (Wake-up Voltage) : | 5Vdc @ 1 min. (from turbine) |
| Power Activate Voltage : | 5V |
| Battery Suggestion : | 24VDC/100AH/150AH/200AH |
| Maximum Battery Charging Current : | 10/15/30 Amp |
| Battery Protection Voltage : | 27.6V ±0.5V |
| Float Charging Voltage : | 28.8V ±0.5，1min charging per 10min |
| Loading Output Current : | DC 16Amax, |
| Discharging Limit : | 23VDC ±0.5 |
| Loading Control Set-up : | 14 sections |
| Sleep Mode Activate Voltage : | 23Vdc ±0.5 (from battery) |
| Current of Stand-by Mode : | <1mA@Sleep Mode |
| Additional Outdoors Requirement : | Optional |
| Package Interface : | 20cm PVC line to line |
| Dimensions(L×W×H) mm : | 200×142×50 |
| Weight : | 1.5 kg |
Note:
- Information and specification are subject to change without notice!
Specification of Solar Panel 120W :
ZDNY-120C : Specifications and Parameters
| TYPE | ZDNY-120C |
|---|---|
| Peak Power(Pm) : | 120W |
| efficiency rate : | 13.8% |
| Power Tolerance : | ±3% |
| Open circuit Voltage (VOC) : | 43.6V±0.5 |
| Short Circuit Current ISC) : | 3.72A±0.2 |
| Maximum Power Voltage (Vmp) : | 35.4V±0.5 |
| Maximum Power Current(Imp) : | 3.39A±0.2 |
| Size of Module : | 1490×670×35mm |
| Cell Type : | Monocrystalline |
| Glass type and Thickness : | Low iron tempered 3.2mm |
| Weight : | about 12kg |
30W LED main lamp specification :
| SPECIFICATION | |
|---|---|
| Series number : | TAR-N-C12-30 |
| Voltage : | 12—24VDC |
| Rated power consumption : | 30W |
| Real power consumption : | 24–30W |
| Lamp shape : | JME007 Aluminum Alloy |
| Lamp lifetime : | >50 000Hrs |
| Guarantee : | 2 years |
| Lamp dimension : | 365*198*101mm |
| Package dimension : | 415*280*210mm |
| Lamp color : | Aluminum natural color |
| Net weight : | 3.3 KG |
| Gross weight : | 4.4 KG |
| MECHANICAL SPEC | |
| Ta（Ambient temp） : | -30~+50℃ |
| Lamp temp : | Ta +20℃ |
| IP level : | IP65 |
| LED chip lifetime : | >50 000Hrs |
| OPTICAL SPEC | |
| LED type : | NICHIA 183 CHIP |
| Luminous efficiency : | 126 lm @ 350mA |
| Color temperature : | 5000K |
| Luminous flux : | >1800 lm |
| Uniformity : | 0.4 |
| CRI : | >72 |
| CERTIFICATES | |
| ISO9001：2000 | CE |
Solar PV Charging Controller RC10-II
| Model number : | RC10-II |
|---|---|
| Rated power : | 200W |
| Input voltage : | 45Vdc Maximum |
| Cut in / cut off (input) : | 23V /22.2V |
| Rated voltage (input) : | 48Vdc Maximum |
| Rated current (input) : | 10A |
| Standby current : | < 6mA |
| OVP (output) : | 30Vdc |
| Maximum current for discharging/charging : | DC 10A |
| Timer setting for discharge : | 17 segments |
| Connection : | Terminal board |
| Battery supporting : | 12V /24V automatic switch |
| Operation temperature : | -35℃~55℃ |
| x W x H ( mm ) : | 129x70x34 Installation holes: 123 x 50 mm |
| Weight : | ~ 300g |
Note:
- Information and specification are subject to change without notice!
SLSP-KX-01-4500 Power Curve and Drawing View
